High-performance	Reliability
Ease of use	Value for money

Pocket Media Drive Serial ATA drive A A -- Connect to a primary hard disk drive. MA ST ER B C SLA VE B -- Connect to a secondary hard disk drive (select models only). C -- Connect to the computer motherboard. To C PU Parallel ATA drive 5 Replace the front and side panels, and close the computer. See "Opening and Closing the Computer" on page 1. 14 Upgrading and Servicing Guide Removing the memory card reader 1 Prepare the computer to be opened, and then remove the side and front panels. See "Opening and Closing the Computer" on page 1. 2 Release the drive by removing the screw on the top of the memory card reader, sliding the memory card reader to the left to loosen it, and then pulling it partway out of the front of the chassis. 3 Disconnect the cables from the back of the memory card reader. 4 Pull the memory card reader out of the front of the chassis. Upgrading and Servicing Guide 15 Adding or replacing the memory card reader 1 Complete the procedures to remove the memory card reader, if necessary. See "Removing the memory card reader" on page 15. 2 Slide the memory card reader partway into the front of the chassis. 3 Attach the cables to the back of the memory card reader. 4 Push the memory card reader into the chassis until the screw hole on the chassis is aligned with the screw hole on the top of the memory card reader, and then insert the short screw to secure the memory card reader to the chassis. 5 Replace the front and side panels, and close the computer. See "Opening and Closing the Computer" on page 1. 16 Upgrading and Servicing Guide Removing the hard disk drive 1 Prepare the computer to be opened, and then remove the side and front panels. See "Opening and Closing the Computer" on page 1. 2 Gently lay the computer on its side...