High-performance	Reliability
Ease of use	Value for money

Remove the paper backing from one side of the hookand-loop fastener. Make sure the rubber cups and your windshield are clean. Push the bracket firmly onto the windshield. Attach the detector to the bracket. Check the angle of the unit. Attach the pad to the dashboard at your chosen location and remove the other paper backing. To adjust the angle if necessary, gently push or pull on the bracket to bend it. DO NOT use the detector to bend the bracket. Plug the power cord into the detector. Attach the detector to the hook-and-loop fastener. You can remove and reattach the unit as often as you like. Plug the power cord into the detector. Plug the cigarette lighter adapter on the power cord into your vehicle's cigarette lighter. You can temporarily remove the detector whenever you wish by depressing the bracket release button and sliding it off the bracket. Plug the cigarette lighter adapter on the power cord into your vehicle's cigarette lighter. 4 English Nothing Comes Close to a Cobra® 5 9376-XRS 9930 - 7 FINAL 2/23/06 11:59 AM Page 6 Your Detector Getting Started · Your Detector Getting Started · Compass Battery Voltage Power On/Off Standby Screen Icons Your detector uses the following icons to indicate modes and functions when set: City Mode Highway Mode On-Off/Volume Control Rotate clockwise (away from you) To Turn on the Unit and Adjust the Audio Volume Rotate the On-Off/Volume control clockwise (away from you). Tone Testing, then three beeps Visual Display Voice Testing, then three beeps System Ready Sample Screen IntelliMute Up IntelliMute Down User Settings Alert Settings None Voice Alert NOTE For example, the sample screen indicates that IntelliMute is active, the Compass is calibrated, your system is set to Highway mode and your vehicle's battery voltage is charged to 13. 8 volts...