Find reviews of all products : user-friendliness, efficiency, reliable and value for money.

Compare opinions and buy at the best price!

15,826,460 reviews

4,270 brands
289,256 products
Diplotop - product comparison - gathers FAGOR 8025 T CNC users reviews, tests and opinions.With a data base of unprecedented wealth, 273 reviews for the FAGOR 8025 T CNC, Diplotop compares the FAGOR 8025 T CNC with its competitors in order to find the best.
Sponsored Links
Search
Brand or manufacturer:
Reference :

  All FAGOR reference numbers
  The most popular FAGOR products
High-performance Reliability
Ease of use Value for money

FAGOR 8025 T CNC Reviews

On average, its users find the user-friendliness of the FAGOR 8025 T CNC reasonable.The find it doesn't really stand out for its reliability nor its sturdiness., However their opinions are divided. If you want to make sure that the FAGOR 8025 T CNC is the solution to your problems, make the most of the help and assistance of other Diplofix users.

Its users find it fairly efficient., But they are not unanimous. They think that it is sold at the right price You'll find the answers to all your questions on the FAGOR 8025 T CNC in the user manual (information, specifications, safety advice, size, accessories, etc.)
Manual abstract:
When the MFO is at a position other than those for the handwheel , the CNC takes it into account and applies a "x1" multiplying factor. Example: Having a Fagor electronic handwheel (25 lines per turn) set as follows: P602(1)=0 Millimeters; P501=1 Resolution 0. 001 mm. ; P602(4)=0 x4 Multiplication factor Depending on the position of the MFO switch (Manual Feedrate Override), the selected axis will move: Position 1 1 x 25 x 4 = 0. 100 mm per turn Position 10 10 x 25 x 4 = 1. 000 mm per turn Position 100 100 x 25 x 4 = 10. 000 mm per turn 5. 2 USING ELECTRONIC HANDWHEELS The machine uses one electronic handwheel When using a single electronic handwheel, it must be connected to A6. If the handwheel is a FAGOR 100P type, machine parameter "P609(1)" must be set to "1". Once the desired handwheel position has been selected at the MFO switch, press one of the JOG keys of the axis to be jogged. The selected axis appears highlighted. When using a FAGOR handwheel with an axis selector button, the desired axis can also be selected as follows: * Press the push-button on the rear of the handwheel. The CNC selects the first axis and it highlights it. * By pressing the button again, the next axis is selected and so on, rolling over from the last axis to the first one. * By keeping the button pressed for more than 2 seconds, the CNC de-selects the currently selected axis. The selected axis will be jogged as the handwheel is turned, reversing directions when reversing the turning direction of the handwheel. -6- When trying to move an axis faster than the maximum feedrate allowed (machine parameter "P110, P310"), the CNC will limit the actual feedrate to that parameter value ignoring the additional pulses, thus, avoiding following error messages...
Ease of use
The users were asked the following question :

Is the 8025 T CNC easy to use?

273 users answered questions and rated the product on a scale of 0 to 10. The rating is 10/10 if the FAGOR 8025 T CNC is very user-friendly.

The reviews (rough results) are presented in the following graph :

012345678910

By leaving the mouse on a column for a few seconds, you can see the number of people who voted to make up the score that appears in the horizontal axis.

Statistical data :

= 7.16
= 2.60

The average score balanced by the number of reviews is 7.16 and the standard differential is 2.6.
High-performance
The users were asked the following question :

Is the 8025 T CNC highly efficient?

273 users answered questions and rated the product on a scale of 0 to 10. The rating is 10/10 if the FAGOR 8025 T CNC is, in its domain, the best on a technical level, the one offering the best quality, or offering the largest range of options.

The reviews (rough results) are presented in the following graph :

012345678910

By leaving the mouse on a column for a few seconds, you can see the number of people who voted to make up the score that appears in the horizontal axis.

Statistical data :

= 7.08
= 2.46

The average score balanced by the number of reviews is 7.08 and the standard differential is 2.46.
Reliability
The users were asked the following question :

Is the 8025 T CNC reliable, sturdy?

273 users answered questions and rated the product on a scale of 0 to 10. The rating is 10/10 if you think that the FAGOR 8025 T CNC is a sturdy product, which will last a long time before breaking down.

The reviews (rough results) are presented in the following graph :

012345678910

By leaving the mouse on a column for a few seconds, you can see the number of people who voted to make up the score that appears in the horizontal axis.

Statistical data :

= 7.16
= 2.47

The average score balanced by the number of reviews is 7.16 and the standard differential is 2.47.
 
Value for money
The users were asked the following question :

Is the 8025 T CNC good value for money?

273 users answered questions and rated the product on a scale of 0 to 10. The rating is 10/10 if you think that the FAGOR 8025 T CNC is really not expensive considering its features.

The reviews (rough results) are presented in the following graph :

012345678910

By leaving the mouse on a column for a few seconds, you can see the number of people who voted to make up the score that appears in the horizontal axis.

Statistical data :

= 7.11
= 2.51

The average score balanced by the number of reviews is 7.11 and the standard differential is 2.51.

  Know our partners   Contact Diplotop team   The most recent reviews   The best products
The most reviewed products
  The main brands
The new products
  Sitemap
References starting with letter A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9

All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.