High-performance	Reliability
Ease of use	Value for money

In the interests of clarity, the charge and set-up facilities of the charger are divided into four logical program groups. A separate program group is provided for each of the different battery types: Nickel-Cadmium, Nickel-Metal-Hydride, LithiumIon / Lithium-Polymer / LiFePO4 (LiFe) and Pb (lead-acid) batteries. Switching programs: Changing from one program group to another is carried out using the MODE button, which must be held pressed in for about two seconds. A brief press on the MODE button makes changes within the program group. Using the charger for the first time When the INC and DEC buttons are pressed simultaneously and the charger is initially connected to a 12 V DC car battery or power supply, the unit goes to the language select menu, otherwise it runs through the information routine which provides you with a brief summary of the essential user settings. DEC Press and hold the INC and DEC buttons simultaneously, then switch on the charger to get the language selection display. Select your language using the INC or DEC button and confirm with pressing the ENTER button. The safety timer can be adjusted by pushing the INC or DEC button. 300min, off) The safety timer is always switched off for discharging and for Pb manual charge. 10s) can be changed by pushing the INC or DEC button. after another 3 sec. The charger is now ready for use, see 10. 5 A _ _ _2 0 0 0 m A h ______ __ _____ For charging / discharging, or conditioning a pack, select the desired program as described below, and then set suitable values...