High-performance	Reliability
Ease of use	Value for money

Make sure that the Trim knob on Channel 1 is all the way counter-clockwise. Plug your StudioLive into a power outlet and turn it on. If your microphone requires phantom power, engage the 48V button on Channel 1 of your StudioLive. Turn on your amplifier or powered monitors. Press the Input button in the Meter section. Speak or sing into your microphone at about the same volume as during the upcoming performance. Turn the trim knob on Channel 1 clockwise while watching the first meter in the Fat Channel. Adjust the Channel 1 trim knob until it is lighting up a little more than half of the green LEDs. The red LED at the top of the meter should never light up! 10. Press the Select button on Channel 1 and move the Channel 1 fader up until it reaches "U" (unity gain). Press the Main button in the Assign section of the Fat Channel so that it is illuminated. This routes the channel to the main output bus. Bring up the Main fader until you can comfortably listen to your microphone through your speakers. With Channel 1 selected, you can use the Fat Channel to add dynamics processing and EQ. For more detailed level-setting procedures and techniques, refer to Section 8. 7 on page 144. 5 9 5 13 8 11 10 4 6 12 Owner's Manual Overview 2 Introduction 2. 1 2. 0 Overview 2. 1 Introduction We suggest that you use this manual to familiarize yourself with the features, applications, and correct connection procedures for your StudioLive before trying to connect it to your computer. This will help you avoid problems during installation and setup. 7 Troubleshooting & Warranty We encourage you to contact us at 1+ 225...