High-performance	Reliability
Ease of use	Value for money

The unit is waterproof and should be positioned close to the steering wheel. It is designed for discreet flush mounting and a pattern is provided to assist panel cutting before fitting. Matching black self-tapping screws are provided to secure the auxiliary control unit facia in position. A good quality silicone sealant should be used to seal between the facia and the mounting panel. 3 HAND-HELD REMOTE'CONTROL SYSTEM It is usually desirable to arrange for operation of the hand-held control unit from anywhere on deck. For this purpose up to two remote sockets may be strategically positioned to make this practical without the need for long and potentially hazardous flying leads on the hand-held unit. In the case of a sailing yacht for example, one socket position in the foredeck area and another in the cockpit usually makes a perfect arrangement. The sockets are flush mounted and a pattern is provided to simplify panel cutting. Matching black self-tapping screws are also supplied. A good quality silicone sealant should be used to seal the joint between the socket facia and the mounting face. When more than one remote control socket is required, the three core interconnecting cables may be paralled together using a standard cable junction box before connection to the Auxiliary Control Unit. 2 DRIVE SYSTEM The following notes describe the installation of both the rotary and linear drive units. equally spaced caphead screws, and may be rotated through 90 degrees to provide a more convenient mounting position if required (Fig. 6) tn some cases, it may be necessary to fabricate a special frame to mount the drive unit. It should be noted that chain tension can exceed 3OOlb (. 50kg), and thus an extremely rigid mounting structure is vital to maintain good chain alignment...