High-performance	Reliability
Ease of use	Value for money

Be sure to insert the battery with the correct polarity. NOTICE You can use the remote control up to a distance of 8 m from the device. In this chapter you receive important information for the handling and operation of the device. NOTICE Most of the functions can be operated by the buttons on the device as well as by the buttons on the remote control. in these instructions operation via the buttons on the device is described. Any reference to the push buttons on the remote control will be specifically highlighted. If no setting is made and/or no button pushed within approx. 5 seconds the device returns to its previous operating mode. Changed settings are saved. To switch off hold down the POWER/DIM button longer. If the volume is set too high it can lead to permanent hearing damage. Each further press of the SEL button accesses the next setting point. The following settings are possible: VOL - Volume (from 0 to 45), BAS - Bass (from -7 to +7), TRE - Treble (from -7 to +7) BAL - Balance (sound distribution between the right and left speakers) (from 8L to 8R) FAD - Fader (sound distribution between the rear and front speakers) (from 8R to 8F) Turn the multi controller to change the settings of the displayed menu items. Further settings with the SEL button hold down the SEL button for approx. 2 seconds and then press the SEL button repeatedly until the desired function is shown in the display. INVOL - switch on volume Turn the multi controller to set the volume level, with which the device is to be set when turned on. The clock sets itself automatically when the EON function is switched on and also continues to run when the radio is switched off. If you do not receive any RDS signal you can also set the time of day manually. Turn the multi controller to the right to set the hours and to the left to set the minutes. TAVOL - Volume for traffic radio Turn the multi controller to set the volume level, with which traffic reports are to be played back...