High-performance	Reliability
Ease of use	Value for money

Pressing the =/ TUNING/0 button moves it to the inner track. To end this mode, perform the following steps. 1) Move the If not, the disc cannot be removed. 2) Press the DISPLAY and § buttons together. Note: · When ending this mode, be sure to move the pick-up to the innermost circumference. If not, the disc cannot be removed. · Do not move the sled motor more than required as this will damage the gears. Round holes for cleaning Initializing (Forced Reset) · Perform this mode when resetting the unit or when returning the unit to the customer. · The preset frequency of the tuner, etc. will be the settings at shipment. Procedure: While pressing the 1/u button, insert the power cord into the outlet. ­ 12 ­ SECTION 5 TEST MODE AGING MODE This unit is equipped with an aging mode. Use this mode for analyzing defects and for checks after completing repairs. After repairs, perform aging 100 times and check that the unit is normal. The aging mode is executed in the following sequence. The aging mode will continue as long as the unit is normal. If the unit becomes abnormal, it will display the state and number of cycles, and operations will stop. (Refer to Table 1. ) Sequence of Aging Mode: Start Sets the CD function and reads the CD TOC. NO CD TOC OK? YES Pauses first song. OK? YES Message 1 NO Message 2 Last song search paused state OK? YES Starts last song playback OK? YES End playback? YES Is CD playing? NG Opens the CD tray OK? YES Closes the CD tray OK? YES Power OFF Display of number of aging cycles Power ON NO Message 6 NO Message 4 Message 5 NO OK NO Message 4 NO Message 3 Procedure: 1. Press the DISPLAY button and =/TUNING/0 button together. To end aging, press the u button and end. Table-1 Messages and Main Reasons for Stop of Aging No 1 2 3 4 5 6 Error Messages CD No Disc NG CD Pause NG CD Search NG CD Play NG CD Open NG CD Close NG Details of Error Cannot read CD TOC. Cannot set CD pause in CD synchro mode...