High-performance	Reliability
Ease of use	Value for money

Change the oil after being used for a maximum of 8 to 12 times each time. "Clean" oil keeps the flavour and lightness of foods. Replace the Anti-odour cartridge (available from approved Service Centres) · When the saturation indicator on the filter has turned deep red, change the filter. · Open the lid (1). Remove the lid by pulling it upwards (2). · Place the black side of the lid towards you. Change the cartridge each time the deep fryer has been used a maximum of 30 to 40 times. 8 Maintenance · Separate the black steam guard from · Take out the anti-odour filter by pushing the white lid, using the clip. hard from the inside of the steam guard. ENG ! · Fit the anti-odour filter cartridge (saturation indicator on top) on the rear notch (1). · Press the cartridge until it `clicks' into place (2). Make sure that the cartridge is well fixed under the three clips. · Replace the steam guard. · Insert the hooks of the steam guard into the notches in the lid. · Press the steam guard on each side of the locking clip until you hear a `click'. ! Check that the steam guard is locked in place before turning over the lid. · To replace the lid: Place the lid clamps into their slots. 9 ENG Cleaning · Clean the outside of the deep fryer with a ! damp cloth. Dry it carefully. · Clean the other parts using a damp sponge with some washing-up liquid. Never place the equipment in water. Do not use aggressive or abrasive products. Magiclean Clean the lid and the window · Remove the lid. · Separate the cover from the steam guard and remove the cartridge. · You can clean the lid and steam guard in a dish-washer. · Dry the lid, before replacing it and the cartridge in the fryer. · To ensure good visibility, clean the ! Remove and wipe the cartridge before washing the lid. Clean the window each time the deep fryer has been used 8 to 12 times. ! Never replace the lid's seal...